Sealed unvented (pressure-tested) for supplying several draw-off points. The DHW temperature can be freely selected. The electronic regulator enables the automatic adjustment of the electrical output to deliver precisely the required temperature between 30°C - 60°C, up to the output limit. The bare wire heating system is suitable for hard and soft water areas (for application range, see specification). Installation with pressure fittings. Threaded water fittings for installation on unfinished or finished walls, 3-way ball shut-off valve, connection option for direct draw-off taps on finished walls. Pivoting equipment cap for user interface on top. Temperature can be limited to 43 °C.
Attention: Requires a connection to the high voltage system (3~/400V), you may need permission from your local electricity supplier. Installation is only to be carried out by a suitably qualified specialist.